POWER DISTRIBUTION  MAIN BODY ECU(for RHD)  INSTALLATION  

0.958,1.344 0.667,0.927 true 0.521,0.771 0.833,0.927 0.313,0.156 10 *1 0.667,2.688 0.979,2.844 0.313,0.156 10 *a

*1	Housing Sidewall
*a	20°

Insert the multiplex network body ECU (main body ECU) up to the position where it contacts the housing sidewall of the guide as shown in the illustration.

HINT:

Make sure to keep the angle 20° or more as shown in the illustration.

0.979,1.365 0.594,0.75 true 2.885,1.281 2.531,1.417 true 0.469,0.563 0.781,0.719 0.313,0.156 10 *1 2.927,1.167 3.24,1.323 0.313,0.156 10 *2

*1	Housing Sidewall
*2	Junction Block Fuse

Slide the guide of the multiplex network body ECU (main body ECU) along the housing sidewall so that it contacts the junction block fuses as shown in the illustration.

2.344,1.135 2.833,0.833 false 2.823,0.688 3.135,0.844 0.313,0.156 10 *1

*1	Side A Contact Portion

While keeping the multiplex network body ECU (main body ECU) in contact with side A of the junction block (axis of rotation), rotate it downward as shown in the illustration.

1.281,1.031 0.729,0.469 true 0.563,0.302 0.875,0.458 0.313,0.156 10 *1

*1

Push Area

Press the push area until the claw engages to install the multiplex network body ECU (main body ECU).

NOTICE:

·

Make sure to press only the push area.

·

Confirm the engagement of the multiplex network body ECU (main body ECU) and junction block by listening for the lock sound.

HINT:

If a lock sound cannot be heard, visually check the lock part engagement. The engagement can also be confirmed if the multiplex network body ECU (main body ECU) and junction block are flush.